Bminer is a highly optimized cryptocurrency miner that runs on modern NVIDIA GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above). Bminer is one of the fastest publicly available miners today -- we use various techniques including tiling and pipelining to realize the full potentials of the hardware.

Bminer also comes with REST APIs to facilitate production deployments (e.g., mining farms).

Bminer supports mining Equihash-based coins (e.g., Zcash) with 2% of devfee.
Bminer supports mining Ethash-based coins (e.g., Ethereum) with 0.65% of devfee.
Bminer also supports dual mining mode - mining Ethash-based coins (e.g. Ethereum) and Blake14r-based coins (e.g. Decred) / Blake2s-based coins (e.g. Verge) at the same time. Devfee for the dual mining mode is 1.3%, and the second coin (e.g. Decred/Verge) is mined without devfee.
Bat files

For GPU
@echo OFF

REM Change the following address to your Zcash taddr.

SET ADDRESS=t1ZBtpkUy1y1deYsNJnzdW4tk7HiJEcfUzr

SET USERNAME=%ADDRESS%.w

SET POOL=zec-eu1.nanopool.org:6666

SET SCHEME=stratum

START "GPU: When Crypto-mining Made Fast" GPU.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880

For Nvidia
@echo OFF

REM Change the following address to your Zcash taddr.

SET ADDRESS=t1ZBtpkUy1y1deYsNJnzdW4tk7HiJEcfUzr

SET USERNAME=%ADDRESS%.w

SET POOL=zec-eu1.nanopool.org:6666

SET SCHEME=stratum

START "Nvidia: When Crypto-mining Made Fast" Nvidia.exe -uri %SCHEME%://%USERNAME%@%POOL% -api 127.0.0.1:1880


Features

Fast

Equihash mining on stock settings
735-745 Sol/s on GTX 1080Ti
450-460 Sol/s on GTX 1070
315-325 Sol/s on GTX 1060
Ethash mining on GTX 1080Ti stock settings (power: 250 W)
With : 46.7 MH/s
Without OhGodAnETHlargementPill: 32.2 MH/s
Dual mining using automatic tuning (default) on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill:
ETH 46 MH/s and DCR 1000 MH/s
ETH 46 MH/s and XVG 1770 MH/s
Without OhGodAnETHlargementPill:
ETH 32 MH/s and DCR 2200 MH/s
ETH 32 MH/s and XVG 3750 MH/s

Secure and reliable

SSL support
Automatic reconnects to recover from transient network failures
Automatic restarts if GPUs hang

Operation friendly

Comes with REST APIs to facilitate production deployments

Downloads
Windows x64 for NVIDIA:https://mega.nz/#!KHgngKjK!vEez74mcN8JhsrJ-905bCMspTguKdiBy5aAo6yv-nE4
Windows x64: for GPU: https://mega.nz/#!iKJyib6D!Lf4PU1_3NRr87pvzDGBickhzrPo4f-IUdWOrAgVKtyY


Release notes

8.0.0
Support a dual mining mode for Ethereum (ETH, Ethash) and Decred (DCR, blake14r) / Verge (XVG, blake2s) without affecting Ethereum mining performance.
Automatically tune mining performance in dual mining mode.
Support dual mining mode in launcher and dashboard GUI.
Add scripts to download third party software OhGodAnETHlargementPill to improve Ethereum mining performance on GTX 1080/1080Ti.
Introduce new REST APIs to display stratum/solver/device status.

7.0.0
Experimental support for mining Ethereum.
Various usability improvements on the launcher GUI.
Create a lite distribution without the launcher GUI.

6.1.0
Fix potential regression caused by 6.0.0 for GPUs mounting on risers.
Improve mining algorithm stability.

6.0.0
Failover server supports. Supply multiple uris (separated by commas) via the -uri option to enable the failover support.
A launcher GUI for Windows.
Reduce reject rate caused by stale shares.
0.3-0.5% performance improvement depending on card models.
Fix inaccurate metrics at the start of Bminer.
Reduce CPU usage the start of bminer.
Support miner.reconnect().
Experimental support for miningrigrentals.
A new option -no-runtime-info to disable runtime information collection.

5.5.0
Show the fan speed in both console and UI.
Fix compatibility issues for pool.miningspeed.com.
Fix a bug that causes Bminer fails to start on Windows under some configuration.

5.4.0
Fix a reconnection issue in the network layer.
Show additional statistics in console.
Allow cross-domain requests to access the API.
Fix the compatibility issue with docker.
Introduce the option `-share-check` to make the time of recovering from no accepted shares configurable.

5.3.0
Experimental support for EthOS / Ubuntu 14.04.
Support AMD K10 CPUs.
Automatically restart hanged network connections.
Improve compatibilities with mining rigs with more than 8 cards.

5.2.0
Introduced the option -logfile to append the logs into a file.
Minor optimization on Windows for cards that are mounted on the risers.
Improve compatibility for NiceHash.

5.1.0
Support NiceHash.
Fix unstable network connections in 5.0.0.
Fix performance regressions for 1080Ti under Linux.

5.0.0
Minor performance improvement for GTX 1060.
Fixed performance regressions in 4.0.0 on Windows.
Optimization on the networking layer.
Show GPU ID in case of hardware errors.
Introduced the option -no-timestamps which suppresses the timestamps in the logging messages.

4.0.0
Minor performance improvement.
Support older CPUs like Core 2 Duo.
Support mining rigs that have more than 8 GPUs.
Support luckpool.org.
Removed the polling option.
Introduced the option `-max-network-failures` which allows Bminer to exit after consecutive network failures.
Various improvement on the UI.
Localization for Russian and Chinese.

3.0.0
Minor performance improvement.
Disable CPU polling by default.
Introduce a Web-based dashboard.
Support slushpool.

2.1.0
Add the -polling option to make GPU polling configurable.
Disabling polling reduces the CPU usage but it might reduce the performance in some configurations.
Improve the stability of the network connections.
First public release for Linux.

2.0.0
First public release.

DelosMiner for nVidia GPUs by TeamDelos
optimized for BitCore, c11, hmq1725, hsr, LYRA2v2, Phi, Skein, Skunk, Tribus, x16r, x16s, x17
DelosMiner see 1.3.0a

DelosMiner is a highly optimized cryptocurrency miner that runs on modern nVidia GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above). DelosMiner was initially used internally by TeamDelos. We decided, however, to share this miner. Depending on your feddback more releases will be provided.

We made great experience with nVidia GTX 1070 and GTX 1080 GPUs. Please let us know your results with your hardware!

Download - Stable Builds

Win 32-bit with CUDA
9.2: https://mega.nz/#!ePZyhZCb!W7aExxHZzsJYAnOQZTxCL2Eq5MBI6OpzysZtvMfZ1XQ

Download - Experimental Builds

Win 64-bit with CUDA
9.2: https://mega.nz/#!GGwl2AoC!nieKbmW_LlpGANIsM5sfWsnSlDs1ZtUtZQskgmAUVM0

Notes:

CUDA 9.1 is faster for most algos on most systems compared to CUDA 9.2. Hence, we recommend to use the CUDA 9.1 build!
32-bit versions might perform faster for certain system configurations.
64-bit versions are not stable yet. We appriciate your feedback, if you like to test them.
Usage

Command line usage and API is identical to ccminer, such as this:

Dev fee

low dev fee 1%
Dev fee will start randomly when miner is first started. After 1% of time mined then automatically switches back to user pool.
Release notes

1.3.0a

Logging: shows pool switching.
1.3.0

Performance boosts on LYRA2v2, Skein and x16r!
Additional core speed improvements of up to 2% for most algos.
Revised dev fee mechanism for a seemless mining experience.
1.2.2

Essential stability fix!
Additional core speed improvements +1-2% total for all algos.
1.2.1

Core speed improvements +2-3% total for all algos.
1.2.0-pre2

Segmentation fault fixed.
1.2.0-pre1

Rewrite of x16r engine for performance boost.
Further code optimizations.
1.1.2

Minor performance improvement for nVidia GTX 1070.
Show network ping.
1.1.1

Fix potential regression caused by 1.1.0 for GPUs mounting on risers.
Improve HMQ1725 mining stability.
1.1.0

First public release.

Kryptex-a Program for automatic earnings (mining cryptocurrency BitCoin). Earnings in the Kryptex program depends on the power of the processor and graphics card. The system has an affiliate program, with the help of which you can earn an additional 10% of the partners involved . The minimum amount of the requested payment is: 0.0002 BTC. On the Kryptex project, there are two options for withdrawal of earned funds, the first is the withdrawal In the bitcoin cryptocurrency and exchange for the currency of your country through Local Bitcoins or exchange offices. the second option is to output to The QIWI payment system directly from the project. From Qiwi money can be transferred to your card or phone. The program can be run on multiple computers at the same time, the accounts of the project have detailed statistics.

Result. From 1 of this month on the cryptex, the GTX 460M I get 51-52 Kx. On nicehash-28-29 with not weak aggression, then draw conclusions)

Download here - https://mega.nz/#!OLQxEDqS!wHQndg1bHutpok83_eO8GibvkvgLCKt1LVDJ8nOP9YA

This service allows you to earn money (cryptocurrency) on The capacities of your computer. Put the program on your computer and include the money in the meantime on the machine drip on the account. The more powerful the hardware in your machine (CPU and graphics card), the more money You, as we are promised, will be able to earn. I at first too doubted but searching systems Google and Yandex on Kryptex reviews, and anything intelligible did not find, I decided to take and to check this website and share with You. At first, the project looked very suspicious for me and I really seriously doubted its reliability.


As for the software itself, in the settings of the Kryptex program there are two modes of cryptocurrency mining: comfortable and complete. Comfortable mode is easier-reduces the load on the processor and graphics card Of your device, thereby freeing up more resources to work on the computer during the mining process. Full mode loads the system already at full capacity, which at the same time, respectively, increases and your income.

In the beginning, download and install the proposed program-miner and run it. Note that different anti-viruses may swear on the installation of such mining software (which is the program from the Cryptex) and block some files. But there is nothing terrible here, this program will not harm your computer, do not worry

Version 0.3.4b.

EWBF's Zcash cuda miner.
Expected speeds 500 sols/s gtx 1080, 444 sols/s gtx1070. 300 gtx1060 6G. Stock settings.
Writen for pascal gpus but works on cards with at least 1Gb memory, and Compute Capability 2 and higher.
Miner contain dev fee 2%.
Sorry for my bad english  [​IMG]

Version 0.3.4b
A slightly improved speed of about 2%
Added option --intensity, sets maximum intensity.
Added support for configuration files.
Added option --config, sets the name of the config file.
Added support for failover servers, through config files.
Added new values to the api method getstat.
Added http api you can use http://127.0.0.1:42000/getstat address to get statistics.
Added simple web page with statistics, simply open the api address in the web browser. (Experemental)
Fixed couple of bugs.

Version 0.3.3b
Added option --pec power efficiency calculator.
Added option --fee developer fee control.
Use miner --help command for more information.

FAQ:
Q: How to select a GPU that will be used by a miner
A: Use option --cuda_devices 0 1 2 digits is id of the devices which will be used.

Q: How intensity works?
A: The miner uses adaptive intensity and tries to use the maximum intensity value, with the help of the --intensity option you can set a limit on the maximum intensity, this will slightly reduce gpu usage and performance. Allowed values 1 - 64. You can set different values for each cards --intensity 64 64 64 64

Q: How to use config?
A: You can run the miner like all previous versions with command line arguments, in this case the config file will be ignored. If you sets the --config argument, the specified config file will be used, all other command line arguments will be ignored. If you run a miner without command line arguments, the miner will try to use the default config file miner.cfg.

Q: How to use failover servers
A: This feature works only with config files, see config examples, supplied with the miner.

Windows x64
https://mega.nz/#!jaoW2IgY!35438TyH78QBjRY0CsrnI4YT8Ku-v5-2DNZpPncURYo